Owner’s Manual 2009

25
4.2. Rear sight adjustment
Fixed sights model
The fixed sights have been targeted at 25 ft by using SS195 ammunition.
If necessary, change the horizontal setting of the rear sight in order
to move the point of impact towards the right or left side :
• Remove the slide assembly from the frame of the pistol as
described in § 5.1 and then fix the slide assembly into a vice.
When fixing the slide assembly into the vice, use rubber padding or a
rag to avoid scratches on the slide and ensure that the holes for
reaching the rear sight remain easily accessible.
• Using a 0.05” allen key, loosen the small screw on top of the
rear sight.