Owner’s Manual 2020

45
5. Ensure that the retaining tab of
the floor plate catch protrudes
into the magazine floor plate and
prevents it from sliding off the
magazine. If the floor plate catch
does not align, tap the magazine
against your hand to move the
floor plate catch into location
(Figure 64).
NOTE: Disassembly beyond the instructions provided is not necessary or
recommended. Further disassembly should only be performed by FN
authorized personnel.
11.5 FN OPTICS MOUNTING SYSTEM
(APPLICABLE ONLY TO PISTOLS WITH FN OPTICS MOUNTING SYSTEM)
The FN Optics Mounting System
allows for the installation of many
available pistol compatible optical
sights as well as slide caps to cover
the mounting surface if an optical
sight is not installed.
The FN Optics Mounting System
consists of a cut in the top of the
slide, MRD plate, o-ring and screws.
FIGURE 64
Confirm floor plate installation.
FIGURE 65
FN Optics mounting System.