Owner’s Manual 2020

16. LASERMAX FLASHLIGHT GRIP

WARNING: Prior to installing, changing battery, aligning flashlight or cleaning &

maintenance, make sure pistol is unloaded. If not, unloaded following the “UNLOADING”

instructions in the FN manual.

WARNING: Contains a lithium battery. Donot disassemble or incinerate. Keep out of

reach of children. Contact poison control center if swallowed. Recycle or dispose of properly.

LASERMAX INSTALLATION

Please refer to your FNmanual for grip housing removal

and installation or visit www.youtube.com/LaserMaxInc

for a video tutorial.

LASERMAX OPERATION

Locate the activation switch on left or right side of grip

housing. Tap switch once to activate.Tap again to

deactivate. To change the light from constant to pulsing

mode, first, turn the light on, then press and hold the

activation switch for approximately three seconds.

Repeat the process to return to previous mode.

BATTERY REMOVAL &

INSTALLATION

View complete battery replacement video tutorial at

www.youtube.com/LaserMaxInc

FOR LIGHT HOUSING:

1. Remove battery cover screw with Phillips head

screwdriver (not included) (Figures1).

2. To remove battery, invert grip housing and tap lightly

on your hand or flat surface until battery drops out

(Figure2). To avoid damage, do not insert tools or

other sharp objects in battery compartment to

remove battery.

3. Insert one (1) CR2 Lithium battery in the direction

indicated inside compartment.

4. Insert battery cover ensuring cover tab seats into grip

housing slot (Figure3).

Grip Housing Slot