Owner’s Manual 2020

2. Remove the floor plate catch, magazine spring and follower from the

magazine body (Figure 58).

11.4.1 MAGAZINE REASSEMBLY

1. If removed, assemble the follower on to the magazine spring

(Figure 59).

2. Insert the magazine spring and follower into the magazine body with

the angle of the follower matched to the angle of the top of the

magazine (Figure 60).

3. Using the floor plate catch with the tab protruding down (away from

the magazine spring) compress the magazine spring into the magazine

body until the spring and floor plate catch are inside of the magazine

FIGURE 59

FIGURE 61

FIGURE 60

FIGURE 62