Owner’s Manual 2020

36
3. Insure the striker block lever is in the down (rotated forward) position.
Guide the slide and barrel assembly onto the frame until the back of
the slide is aligned with the back of the frame assembly (Figure 41).
4. Insert the slide stop lever into its hole with the lever portion pointing
up until the slide stop lever spring is on the shank of the slide stop
lever pin. This presents an angled surface to the slide stop lever spring
as the lever is inserted (Figure 42).
5. Rotate the slide stop lever to align with the window cut in the grip and
chassis for the leg of the slide stop and press the slide stop in until
the edge of the leg is in the hole (Figure 43).
FIGURE 42
FIGURE 41
FIGURE 43