Owner’s Manual 2020

5. After releasing the striker, you can remove the slide by holding the

trigger down and pulling the slide forward and away from the frame. If

the striker is inadvertently recocked, return to Step 4 (Figure 36).

6. Hold the slide upside down, grasp the small spring of the recoil spring

assembly then lift the recoil spring assembly up and out of the slide

(Figure 37)

7. Grasp the barrel by its lug, lift it

up and around the extractor and

slide the barrel rearward out of

the slide (Figure 38).

This level of disassembly is sufficient

to perform a thorough cleaning.

Disassembly beyond the instructions

provided in this manual should only

be carried out by a qualified armorer.

FIGURE 38

FIGURE 36 FIGURE 37