1220mm Super EZ V2 Manual

5
Main Wing Installation
Model Assembly
KA2.6*12
fig1 fig2
fig3 fig4
fig5 fig6
Unpack the assessory bag of rudder, which includes servo arms , screws, linkage rods (including clevis
and sleeve). Install the servo arms as shown in Figure 1. Install the linkage rod as shown in Figure 2.
Pay attention to the direction of the servo arm.
Unpack the assessory bag of elevator, which includes servo arms, screws, linkage rods (including clevis
and sleeve). Install the servo arms as shown in Figure3.
Assemble the elevator with rudder and connection pipe as shown in Figure 4
Secure the elevator with screws as shown in Figure 5.
Install the linkage rod as shown in Figure 6. Pay attention to the direction of the servo arm.
1.
2.
3.