Manual

Sights

The 9C1 handgun is a compact pistol, designed to have a minimum number of protrusions, allowing it to be stowed easily in a

purse or upon the person. This design reduces the chance of snag when removing quickly for operation. The 9C1 low prole

sights were considered with this design intent in mind.

Additional sights sold separately

Elevation

Four additional front sights can be purchased separately for elevation U1.0, U2.0, D1.0, and D2.0. These numbers that

indicate how much the bullet impact will move (in inches) on a target set at 50’. To change the front sight, loosen the Phillips

The rear sight can be removed by tapping on it rearward with a small punch.

screw and tap it (the screw) to unseat the sight before

completely removing the screw and replacing the sight with

another.

Windage

Seventeen windage sights can be purchased separately. 1

blank (center) L0.25, L0.5, L0.75, L1.0, L1.25, L1.50 L1.75,

L2.0, R0.25, R0.5 R0.75 R1.25, R1.75, and R2.0. The sights

are labeled with numbers that indicate how much the bullet

impact will move (in inches) on a target set at 50’. The rear

sight can be removed by tapping on it rearward (picture)

with a small punch. A new sight can be pressed into place

and tapped home with soft mallet until seated.