Manual

Sights

The 9C1B handgun is a compact pistol, designed to have a minimum number of protrusions, allowing it to be stowed easily

in a purse or upon the person. This design reduces the chance of snag when removing quickly for operation. The 9C1B low

prole sights were considered with this design intent in mind.

Elevation

Three front sights are included for elevation 1 blank (center), U2.0, and D2.0. These numbers that indicate how much the

bullet impact will move (in inches) on a target set at 50’. To change the front sight, loosen the Phillips screw and tap it (the

screw) to unseat the sight before completely removing the screw and replacing the sight with another.

The rear sight can be removed by tapping on it rearward with a small punch.

Windage

Six windage sights are included. 2 blank (center) L1.0,

L2.0, R1.0, and R2.0. The sights are labeled with num-

bers that indicate how much the bullet impact will move

(in inches) on a target set at 50’. The rear sight can be

removed by tapping on it rearward (picture) with a small

punch. A new sight can be pressed into place and tapped

home with soft mallet until seated.