Manual

© 2011 Model 9C1 Gen 2 is a registered trademark of FMK Firearms, Inc. All rights reserved. Made in USA
16
Assembly and Cleaning
Disassembly
WARNING: Always completely unload the pistol prior to disassembly. It is possible to disassemble the 9C1 handgun with
a round in the chamber. EVEN WITH THE SLIDE AND BARREL REMOVED FROM THE FRAME, IT IS STILL POSSIBLE TO FIRE
A ROUND, IF A LIVE CARTRIDGE IS LEFT IN THE CHAMBER. THIS COULD CAUSE INJURY OR DEATH.
To remove the slide:
2. Hold the 9C1
Handgun as shown
and slightly retract
the slide so the
barrel release latch
can be moved
downward.
3. Move the bar-
rel release latch
downward with
your other hand
and allow the slide
to move forward
under spring
pressure.
4. The slide barrel
assembly can now
be removed from the
frame.
1. Insure the pistol
is unloaded and
the magazine is
removed.