Manual

© 2011 Model 9C1 Gen 2 is a registered trademark of FMK Firearms, Inc. All rights reserved. Made in USA
11
Firing Pin Block
The block prevents the striker from moving forward.
When the trigger is pulled, the trigger bar lobe moves the
block upward allowing the striker to move forward after
release and protrude through the breach face to strike the
cartridge primer discharging the pistol.
WARNING: This feature is designed to prevent the pistol’s discharge if it is dropped; however, any mechanical device can
fail or become overruled with careless handling. Care must be taken to insure the pistol is not dropped and that the trigger
only be activated in accordance with all safe operating protocols.
When block
up, striker can
move forward to
contact cartridge
primer
When block is
down striker
cannot move
forward