Manual

© 2011 Model 9C1 Gen 2 is a registered trademark of FMK Firearms, Inc. All rights reserved. Made in USA
10
Mag-Out Safety (Trigger Bar disconnect)
When the magazine is removed from the pistol, the cam, which guides the trigger bar, rotates forward to move the trigger bar
out of the path that would allow its abutment to engage the striker. When the trigger is pulled back, the trigger bar will not
engage the striker at its abutment, and the gun will not re.
Replacing the magazine will move the cam allowing the trigger bar to once again engage the striker at its abutment and re
the weapon when the trigger is pulled.
WARNING: Removing the magazine will not unload the chamber and an empty magazine placed into the pistol will allow
it to re.
WARNING: Any safety device can be damaged or fail. No safety device can avert tragedy if safe gun handling rules are
not followed. Always follow rules for safe gun handling. Do not assume removing the magazine will make the weapon
impossible to re.
Magazine
Abutment
Rear Housing
Mag-Out Safety
Trigger Bar
Striker