Manual

Cleaning

Disassemble in accordance with disassembly instructions.

(See page 16)

1. Apply gun solvent with a soft cloth or cleaning patch to all areas

fouled by gunshot residue on the slide, frame, barrel, and recoil

spring. A small brush works well to apply uid to small areas inside

the frame around the trigger and rear housing.

2. With a barrel brush designed for 9mm pistols, brush the barrel

and chamber with cleaning uid.

3. Wipe all components dry to remove all cleaning uid.

4. Use light gun oil sparingly on all metal parts to prevent rust

and ensure reliable operation. Oil should be applied to all moving

surfaces with special attention to the frame rails, trigger bar, and

barrel/slide lock up. Also, add a few drops between the extractor

and slide, inside the striker tunnel, and around the block. Acid in

skin from nger prints can cause rust, so wipe with clean cloth or oil

before storage.

WARNING: Ensure the pistol is unloaded before cleaning. Many gun accidents and DEATHS occur by attempting to clean

a loaded weapon.