Manual

© 2011 Model 9C1 Gen 2 is a registered trademark of FMK Firearms, Inc. All rights reserved. Made in USA
18
Assembly
WARNING: Always insure there are no live cartridges in the chamber when assembling.
To replace the striker unit:
To replace the slide assembly:
1. Place the barrel into the slide, into its lock up position.
2. The recoil spring retainer has one large diameter end and one small diameter
end. Place the small diameter end into the slide and depress the assembly until it
rests on the barrel lug designed to accept the recoil spring assembly.
3. Line up the slide rail grooves with the frame rails and move the slide rearward
until the barrel release clicks into place.
4. Move the slide back and forth to ensure smooth operation and assure completed
assembly is correct.
1. Slide the striker unit into its hole in the rear of the slide.
2. Depress the rear striker spring retainer with the edge of the slide end cap and
slide the end cap up until you feel or hear a click.