Owner manual

IDS INDUSTRIAL DISPENSER INSTRUCTIONS
IN-IDS-08
1
IDS2000A / IDS2000AGM
FMI P/N IDS2000A / IDS2000AGM
DWG NO
TITLE
SHT 1 OF 2
Fluid Metering Inc.
REV
5 Aerial Way, Suite 500
Syosset,NY 11791
OUTLINE DRAWING,
IDS A SERIES,
ENCLOSURE
600059
G
R
NOTE: DIMENSIONS ARE IN INCHES [MILLIMETERS]
TOLERANCES UNLESS OTHERWISE SPECIFIED: .XX = ±.02 [.50] .XXX = ±.010 [.25]
3.4 [86.4]
BASE AND THERMO PAD MOUNTING
15.7 [398.8] APPROX.
6.75 [171.5]
7.50 [190.5]
GENERAL SPECIFICATIONS:
OPERATING CONDITIONS:
AMBIENT TEMPERATURE; 41°F - 104°F [ 5°C - 40°C ] IN STILL AIR, MOUNTED VERTICALLY, WITH AT LEAST 1 INCH OF CLEAR AIR SPACE ON ALL SIDES. MOUNTING MAY BE BY 1 INCH WIDE BARS OR CHANNELS. FOR HIGHER TEMPERATURE AMBIENT, ADDITIONAL HEAT SINKS AND FORCED AIR WILL BE REQUIRED TO KEEP THE HOUSING OUTSIDE TEMPERATURE TO A MAXIMUM OF 125°F [52°C] ON ANY SURFACE. RELATIVE HUMIDITY; 30% TO 80% NON-CONDENSING. ATMOSPHERIC PRESSURE; 10.5 PSI [700 MILLIBARS] TO 15.4 PSI [1060 MILLIBARS].
NON-OPERATIONAL CONDITIONS:
AMBIENT TEMPERATURE; 0°F [-18°C] TO 158°F [70°C]. RELATIVE HUMIDITY; 30% TO 85% NON-CONDENSING. ATMOSPHERIC PRESSURE; 7.5 PSI [500 MILLIBARS] TO 15.4 PSI 1060 MILLIBARS].
R.50 [12.7]
TYP
2.0 [50.8]
1.0 [25.4]
0.38 [9.7]
COVER
Ø0.30
[7.6](8X)
4.8 [121.9]
11.7 [297.8]
3.7 [94.0]
R.50 [12.7]
TYP
6.0 [152.4]
SHELL SIZE 13 ARRANGEMENT 13-9 STANDARD SEX
2.9 [73.7]
4.3 [109.2]
2.0 [50.8]
AMP CIRCULAR CONNECTOR
300598 THERMO PAD
INSTALLING OR REMOVING
5.4 [137.2]
MIN. BEND
1.25" [31.8] RADIUS =
CABLE
OUTLINE CONNECTOR
POWER CONNECTOR
6
4
5
2
1
3
8
7
9
RISK OF DAMAGE TO
ELECTRONICS! TURN
POWER OFF BEFORE
CAUTION
.X = ±.04 [1.0]
OVERALL DIMENSIONS
WITH CSC
PUMP HEAD MODULE
DIMENSIONS REPRESENT MAXIMUM VALUES OF PUMP HEAD EXTREMETIES.
3.5 [88.9]