Owner manual

IDS INDUSTRIAL DISPENSER INSTRUCTIONS
IN-IDS-08
ALL OILS AND PARTICLES. BE SURE THE SURFACE
INSTALLATION INSTRUCTIONS FOR MOUNTING
8. REPLACE WITH A NEW 300598 PAD IF THE UNIT IS REMOVED.
THERMAL PAD, FMI P/N 300598
1. CLEAN THE MACHINE MOUNTING SURFACE OF IS FREE OF RAISED GOUGES OR BURRS. 2. CAREFULLY REMOVE THE BLUE SHEET FROM THE PAD.
3. THE EXPOSED WHITE SURFACE IS "TACKY" AND
WILL STICK TO THE BACK OF THE PUMP ENCLOSURE.
4. ALIGN THE HOLES IN THE PAD AND MOUNTING 6. REMOVE ANY AIR BULGES FROM UNDER THE PAD. 7. BOLT THE DISPENSER IN PLACE.
SURFACE.
5. PRESS THE PAD INTO PLACE.
FINIS H
SURFACE
FINIS H
Chemical Metering Pumps
TOLERANCES UNLES S OTHERW ISE SPECIFIED
.X = ±.0 15
.XX = ±.010
.XXX = ±.005
MAT'L
DRAWN
BY
CHECKED
APPVD
BY BY
TITLE
SCALE DWG NO. REV
DATE DATE
FILE NA M E
APVD
DATEDESCRIPTIONSYM
REVISIONS
DATE
DATE
DWG BY
ORIG.
BY
NOTE : FMI TO BE NOTIFIED IN WRITING PRIOR TO ANY CHANGES IN MATERIALS, PROCESSES OR CONSTRUCTION.
ANG = ±1°
700023
THERMAL PAD
MOUNTING
LABEL
8/16/02
A
8/16/02 8/16/02 8/16/02
Sht 1 of 1
FMI P/N 700023
1