User Manual

10
Repairs can be made to the Micro Nieuport 17 by using the following items:
● Non-butane lighter fl uid “Naphtha” (for parts removal and debonding)
● Thick Foam Safe CA (for parts adhesion), GPMR6072
● Foam safe CA accelerator, GPMR6035
● Two sets of needle nose pliers or hemostats, HCAR0625
● Hobby Knife (#11 blade), RMXR6900
● Clear tape
● Hinge tape, DUBQ0916
REPAIRS
Stock No. Description
FLZA6102 Motor
FLZA6245 Wing Set
FLZA6246 Fuselage
FLZA6247 TAIL Set
FLZA6248 Wing Strut Set
FLZA6249 Pushrod Set
FLZA6250 Landing Gear
FLZA6251 Pilot
FLZA6252 Machine Gun
Stock No. Description
FLZA6253 Control Horns
FLZA6254 Propeller
FLZA6255 Gearbox
FLZA6256 Decal Set
FLZA6257 Cowl & Engine
GPMP0760 LiPo Battery
TACJ2402 TTX402 2.4GHz Transmitter
TACL1424 TR424 Micro Rx w/PZ Servos
To order replacement parts for the Micro Nieuport 17, use the order numbers in the list below. Replacement parts are
available only as listed. Replacement parts are not available from Product Support, but can be purchased from hobby
shops or mail order/Internet order firms. If you need assistance locating a dealer to purchase parts from, contact:
Product Support
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
REPLACEMENT PARTS
To replace or reinstall the propeller, unpower the
model, then hold the motor shaft with needlenose
pliers and push the propeller back onto the shaft.
Once re-installed, add a drop of CA glue to the
propeller to hold it to the shaft.
PROPELLER REPLACEMENT