User manual

Please connect the power adapter 1.

directly to the DC-IN Connector on

the I/O panel.

Power Adapter Installation

3-3.

The system is equipped with a 65W power adapter. Please plug it into the

system as shown below.

1st Gen. Stand•

2nd Gen. Stand•

Place the adapter into the space 1.

created by two alignment pins.

Please make sure that power

connector is supposed to be

revealed for plug-in, rather than

blocked by stand.

Fasten screws (x2) to fix the power 2.

brick holding bracket.

Accessories of Power Adapter:

a. Power Adapter

b. Metal bracket

c. screws (x2)