User manual

12
Second Display Installation
4-3.
Open the rear cover by loosen 1.
the thumb screws (x2) on the both
sides.
Uncover the VFD cover by loosen 2.
the screw (x1).
Aligning the metal bracket attached 3.
to the rear of the 2nd display
module into the right position of the
system and fasten the screws (x2)
to fix the 2nd display module with
the POS system.
Cover the 2nd display cover 4.
provided and fasten the screw (x1).
Connect the RJ45-VGA cable to the 5.
2nd display and the I/O panel.
Cover the rear cover of the system 6.
again and fasten the thumb screws
(x2).