User manual

11
Open the rear cover by loosen the 1.
thumb screws (x2) on the both sides.
Uncover the VFD cover by loosen 2.
the screw (x1).
VFD Installation
4-2.
Install the VFD module by aligning 3.
the metal bracket attached to the
rear of the VFD into the right position
of the system and fasten the screws
(x2) to fix the VFD module with the
POS system.
Cover the VFD cover provided and 4.
fasten the screw (x1).
Connect the RJ45-RJ45 cable to 5.
VFD module and the I/O panel of the
system.
Cover the rear cover of the system 6.
and fasten the thumb screws (x2).