User manual

7
System Assembly3.
Loose the thumb screw on the 1.
HDD cover.
Open the HDD cover.2.
Install the 3.5” HDD and fasten 3.
the screw (x1) with the bracket to
fix the 3.5” HDD.
Connect the SATA cable and 4.
cover the HDD cover.
HDD replacement for fan system
3-1.
To remove and replace the HDD, please follow below steps. The procedures may
be slightly different depending on 3.5” or 2.5 HDD you will install.
For 3.5” HDD
For 2.5” HDD
If your system is installed with 2.5” 5.
HDD, please fasten the screws
(x2) and connect the SATA cable
and cover the HDD cover.