User's Manual
Table Of Contents
16
COM1/COM2 Power Setting
COM1, COM2 can be set to provide power to your serial device. The voltage can be
set to +5V or +12V in the BIOS.
1. Power on the system, and press the <DEL> key when the system is booting up to
enter the BIOS Setup utility.
2. Select the Advanced tab.
3. Select VGA/COMPowerConguration Ports and press <Enter> to go to display
the available options.
4. To enable the power, select COM1 ,COM2 Power setting and press <Enter>.
Select Power and press <Enter>. Save the change by pressing F10.