User's Manual

1024 x 768 18 Single

1280 X 1024 24 Dual

*Note: specialized for Sharp 12.1” LQ121S1LG41/LQ121S1LG42 panel.

LCD Brightness Control Setting

Please note Brightness Control can only be set by setting jumper JP14 for CCFL

on the motherboard C48 V2.1. By default, the inverter is CCFL on the

motherboard jumper setting.

1. Power on the system, and press the

<DEL> key when the system is

booting up to enter the BIOS Setup

utility.

2. Select the Advanced tab

3. Select "Power Configuration

COM/VGA Ports" and press <Enter>

to go to display the available options.

4. To change the brightness, select

“Brightness Control” and press

<Enter>. Choose the desired

brightness level (0~7) press <Enter>.

Save the change by pressing F10.

NOTE: the new brightness will take

effect after the system has restarted.