User's Manual

11
4-2 Install the Wall Mount Kit
The wall mount bracket has threaded mounting holes ( screws provided ) for the
75mm VESA standard; and unthreaded holes for the 100mm standard.
Using the 100mm hole pattern the bracket can be used by itself as a wall mount
bracket. After installing the thumbscrew clip mount bracket to the wall, hang the
system on the bracket.
1. Install screw to secure thumbscrew clip.
2. The bracket slides on to the mount posts, as shown . Normally the bracket would
already be mounted to the wall or a VESA mount and the system would be hung
on the bracket. Once in place the thumb screw would be tightened.