User's Manual

10
4 Peripherals Installation
4-1 Install the MSR Module
The MSR mounts on the right side of the system and uses a front facing MSR slot.
This allows the system to be placed side by side, or in tight spaces, and still be able
to swipe the card.
1. The MSR is installed by first removing the two rubber plugs for the option attachment
point as shown in the picture.
2. Then remove the MSR cover plate on the right back side of the unit by removing the
two screws.
3. Connect the cable together as shown add secure the static ground wire with screw
provided as shown.
4. Attach the MSR using the two screws at the locations as shown in the picture.