USER MANUAL VERSION V0.
Copyright 2010 May All Rights Reserved Manual Version 0.9 Part Number: The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Safety IMPORTANT SAFETY INSTRUCTIONS 111 To disconnect the machine from the electrical power supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. 222 Read these instructions carefully. Save these instructions for future reference. 333 Follow all warnings and instructions marked on the product. 444 Do not use this product near water.
CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. LEGISLATION AND WEEE SYMBOL 2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components.
Revision History Changes to the original user manual are listed below: Revision Description 0.
Table of Contents 1. Item Check List......................... 1 1-1. Standard Items.........................................................1 2. System View.............................. 2 2-1. Front View................................................................2 2-2. Rear View.................................................................2 2-3. I/O Ports View...........................................................3 3. Driver Installation..................... 4 3-1. 3-2. 3-3. 3-4. 3-5. 3-6.
6. Jumper Setting......................... 19 6-1. For B68 Motherboard..............................................19 6-1-1. Motherboard Layout................................................. 19 6-1-2. Connectors & Functions........................................... 20 6-1-3. Jumper Setting.........................................................
1. Item Check List 11111 Standard Items Take the system unit out of the carton. Remove the unit from the carton by holding it by the foam inserts.
2.
22222 I/O Ports View a e Item a b c d e f g h i f g h b c d i Description USB x2 SCSI Coonector USB x 1 Phone Jack (RJ11) Audio Line-out Audio MIC-in Built-in MIC Smart Card Reader Slot * 2D Scanner Items with * asterisk mark can be added on when requested. Note: External equipment intended for connection to singnal input / output or other connectors, shall comply with relevant UL standards (e.g. UL 60950-1 for IT equipment and UL 60601-1 / IEC 60601-1 series for medical electrical equipment).
3. Driver Installation 33333 Driver List B98 v1.
33333 Chipset Driver Installation a. Click “Chipset” in the Driver List menu of K938S B98. After entering chipset menu, double click to run . c. Click the button on the Welcome window. e. Click button. b. File are extracting. d. Click button to accept the License Agreement. f. Click button to complete the Setup.
33333 VGA Driver Installation The VGA drivers can be found in the attached driver CD. In this case "Win2K, XP" is used as an example. The procedure might slightly differ depending on the OS installed. a. Click of “VGA” section in the Driver List menu. c. Click button to run the InstallShield Wizard. e. Click button to the Setup menu. 6 b. Double click to run. d. Files are extracting. f. Click button to accept the License Agreement.
g. Click . i. Click to continue. h. Setup program is running.
33333 Audio Driver Installation The Audio drivers can be found in the attached driver CD. In this case "Win2K, XP" is used as an example. The procedure might slightly differ depending on the OS installed. a. Click of “Audio” section in the Driver List menu. 8 b. Double click to run the InstallShield Wizard. c. Files are extracting. d. Click to start the InstallShield Wizard Setup Program. e. Setup program is running. f.
33333 LAN Driver Installation a. Click of “PCI-E LAN” section in the Driver List menu. c. Double-click to start installation. e. Select an options from , , or and click . b. Double-click . d. InstallShield Wizard is preparing the setup. f. Click .
g. The Setup is running. i. Select and click . k. Click to complete the . 10 h. Select an option in the Hardware Wizard dialog and click . j. is running. l. Click .
