User guide

Operating Instructions FLYTEC 4020 21
At the fourth level, you can enter your name; the name entered appears on the logbook printout.
The individual letters of the name must be entered individually as ASCII code ( ASCII table in
the appendix). The letter displayed is confirmed with the key and the next displayed. The
name may be 21 characters long. The number of the character appears in the digital vario dis-
play and the ASCII code for the character is shown in the MEMO display. Press the
key to enter the next character. Press the key to return to the third level of option mode.
Press both option keys to return to run mode.
APPENDIX
Scope of supply
The following items are included:
• FLYTEC 4020 instrument
• Leg clip
• Protective sleeve
• Manual
The following are available as accessories:
• Various attachment fixtures
• Various speed sensors
• PC software and PC cable
• Printer cable (serial or parallel)
Procedure for Official FAI Observers
1. The observer must familiarize himself with the instrument for a period of at least 1 hour
2. At the take-off site, the observer must note the pilot's name and the type and serial
number of instrument to be used. He must verify that the case is intact and undamaged.
He must inspect both Flytec seals on the back of the unit and ensure that they are in
place and undamaged.
TIME
SPEED
MEMO
ALT 1
ALT 2
CHRONO
ALT 1
ALT 2
CHRONO