User's Manual

14
FS-l6S
Digital proportional radio control system
5.1 Fly Mode
This mode can store settings that can be recalled by toggling a switch.
There are several options available:
• A: Stores the channel used by the flight controller.
• 1. Touch the box to the right of the desired channel.
• 2. Select the correct decimal and use the up and down arrow keys.
• 3. Press the
or to confirm or cancel changes.
• B: Stores the first selected activation switch.
• C: Stores the second selected activation switch.
• D: This number represents the currently selected mode. The name beside the mode number can be
changed.
• 1. Touch the box.
• 2. Use the onscreen keyboard to enter a new name.
• 3. Select the
icon to save and return to the previous menu.
• E: Changes the sensitivity or range of throttle available for each motor.
• 1. Touch the box to the right of the desired channel.
• 2. Select the correct decimal and use the up and down arrow keys.
• 3. Press the
or to confirm or cancel changes.
A
B
D
C
E
Assigning modes to switches.
Which modes are available are determined by which switches are assigned. If assigned to a single 2
position switch you will have access to modes 1 and 2 but if assigned to two 2 position switches you will
have access to 4 modes. To have access to all 9 modes use the two 3 position switches together.
To cycles through all 9 modes sequencaly see the table below:
SwB Postion SwC Position Mode
Up Up 1
Up Middle 2
Up Down 3
Middle Down 4
Middle Middle 5
Middle Up 6
Down Up 7
Down Middle 8
Down Down 9