User's Manual

功能说明：
此功能是对两个输出通道作指数变化量调整设定，适应不通机种对不同赛道以及不同人的操作习惯，以达到最佳的操控
效果。
参数说明：
CHANNEL:通道编号，通道ST和TH通道.100%:指数输出百分比率,-100%表示中心点位置反应会越小,也就是反应越
迟钝;
100%表示中心点位置反应会越大,也就是反应越灵敏,EXP调整量为:-100%到100%(工厂预设值为0%）。
操作方法：
在开机菜单下通过“确认”键进入菜单，通过“左右旋转”键进行EXP菜单选择，再按“确认”键在进入此菜单的操作
（此时ST字符会闪烁）然后通过 "左右旋转"键进行通道ST到通道AUX的选择,选好要变更的通道后按" END"键,此时两个
字符会闪烁,在此时状态下按"左右旋转"键进行-100%到100%的设定.完成后按"END"键可进入另一个通道的设定.依类推
对两个通道进行设定.
编辑完成后按 "确认"键返回并进入菜单选择状态.
在任何状态下按 "返回"键进入开机画面.
18
EXP
Function:
This function is used to change the sensitivity of the 2 channels around the neutral position. In order
to “soften” or make aggressive the response, according to user 's demand.
Parameter:
CHANNEL: channel number, from ST and TH;
100%: steering “EXP” rate, when you want aggressive steering operation, turn the button to
increase the rate. When you want to make steering operation less aggressive, turn the button to
decrease the rate. adjustment range: -100%~0~+100% ( initial value is 0 )
Operation:
Press the “ENTER” button and turn the “EXP” menu. Press the “ENTER” button to enter the “EXP”
menu. The selected channel will be blinking. Select the channel by turning the “ENTER” button and
then press the “END” button (now the percentage will be blinking ). Turn the “ENTER” button to
adjust the rate. After this, press the “END” button to finish the setting. The rest can be done in the
same way. Press the “ENTER” button to save and return to the menu screen. Press the “BACK”
button to return to the opening screen.
GT3X
DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM