User's Manual

12
SUB-T
ST positive percentage
the range of adjustment
factory setting
TH positive percentage
R
L
00%-100%
-100%-00%
00%
00%
the range of adjustment
factory setting
F
B
00%-100%
-100%-00%
00%
00%
UX positive and negative
percentage
Ch3 trim
the range of adjustment
factory setting
-100-00%-100%
00%
说明
忆微能可调节3机的,当调节满足时,能的作用常明工厂
00%; AUX 正负比(CH3, 整量-100%--00%--100%,预设00%
能说
功能发射放的行名编写使用三符)方便及调可使字符0123456789
CDGHKLPQTUXY.
作方
开机下通确认入菜通过右旋键进SUB-T选择按确进入单的(此
ST字符烁)后通右旋键进STAUX择,要变通道按“END键,
字符烁,状态按“旋转进行-100%--00%--100%,完按“END键切
定,ST会闪以此对三道进定。
Function:
This function allows the user to sub trim the steering "ST", throttle "TH", or auxillary "AUX" channels.
Parameter:
CHANNEL: channel number, from ST channel to AUX channel
Operation:
Press the "ENTER" button and turn to the “SUB-T” menu. Press the “ENTER” button to enter the
SUB-T” menu. You now have the option of adjusting "ST", "TH", or "AUX" by turning the “ENTER
button. Press the "END" button to select desired channel, turn the “ENTER” button to make
adjustments to channel trim, press the "END" button to finish the setting. The rest can be done in the
same way. After finishing the setting of these channels, press the " ENTER" button to save and return
to the menu screen. Press the “BACK” button and return to the initial menu at any condition.
GT3X
DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM