BEFORE INSTALLATION Conditions of Use 1.Cold water * hot water pressie: Thai minimum pressure is 0,05 MPa (flow pressure) ; the maximum pressure is 0.75 MPa {static pressure) 2.Do not use steam for hot water supply. Water supply temperature <85°C/ 185°F. 3.The ambient temperature should be.above 0°C/ 32°F, if it Is not higher than 0°C/ 32°F, the water faucet will appear deformed and cracked. Prior to installation: 1.
Tis pic id hus Vices inspire nd EL Define appalling thin feint, pleas he ire | Cleaning]; To debugged by ihe factory 50 the best : TE fr rewove sandiness and sledges from the pigs | condition, Please do not dissoluble Ker 1 Fp water pipe to reverend baldrics from : 1 and assemble it yon self. dissent © backing the fae tha 1.
INSTALLATION 87 20S all the pipes fo check leakage, infirm ng leak occurs when turn on water. 10). Insert decorative screw into the knobs. 2. Insatailation Steps of Body Jets, 9}. Fix the decorative plate and knobs on the valve body. Screw the hand-wheel on the handles and frighten with a Allen wrench. id OO 00 113. Friction indication as shown. a wrench to screw 1. Atach the cover plate Teflon tape to the jet heads clockwise into 10 body jets. threaded tail of the body jets. the body spray outlets.
INSTALLATION 87 20S 3.installation Steps of Rain shower attach the cover plate to the longer tail 2}. shower arm longer thread 3. Brew the shower head of the shower arm. with Teflon tape. clockwise onto the lower end of the shower pipe. A. Insatallation Steps of Hand Shower 3} Place rubber washers in both ends of the hose-Connote the shower hose 1). Wrap supply elbow thread 2). Resew the shower holder {nth supply elbow and shower head.
