BEFORE INSTALLATION Conditions of Use 1.Cold water * hot water pressie: Thai minimum pressure is 0,05 MPa (flow pressure) ; the maximum pressure is 0.75 MPa {static pressure) 2.Water supply temperature (85°C/ 185°F. 3.The ambient temperature should be.above 0°C/ 32°F, if it Is not higher than 0°C/ 32°F, the water faucet will appear deformed and cracked. Prior to installation: 1.Cleaning of water supply pipeline: Supply lines should be purged to clean impurities before connecting the unit to avoid blockage .
INSTALLATION 87 20S Tis pic id hus Vices inspire nd EL Define appalling thin feint, pleas he ire | Cleaning]; | ; Io debugged by he factory to thi best = D1 ta remove sending aad slides from the pips + | condition, Please do not dissoluble h Fp water pipe to reverend baldrics from ki] | and sensibleness yn. vii had 2 ot lacking the fusee. 5 : | Loa Bod 1. Insatallation Steps of Valve Body thieve dimension of drilling on wall needs to be accurate, which as belong; a4" NO.
INSTALLATION 87 20S the installed embedded waterways into the dug water pipe groove and lock the embedded box body with four straws. Note that the embedded box highlights the ceramic tile surface by 0.06". Fill the tariff with cement, secure the pipe and stick the file. git 1 457157 TE EE gs Recommended isolationist ith eon apy £ | mntsosof Hum: Thinking's af ties : to bareheaded 10).
INSTALLATION 87 20S installation Steps of Shower head 2}insert the expansion bolt into 13.00 4 holes with electric drill, the the hole and Jock the outwith 3) Aka auto selling board; dimensions of fap wall hole are 8.3 adjustable wretch, Install four ard drill a 108 square Hole and 9.4” as follows. expansion bolts. on the ceiling board.
