VENTURER 32 (VTR32) ® VISIMO (VM032/VM032+) Original Instructions ROLLERMO (RM032) EASIMO (EM032/EM032+) RE 320 (RE32) ROLLERMO RE320 VENTURER 32 EASIMO VISIMO AT I FORM N I T RTA N I M P O fore use rence be re refe u t Read u f r in fo & reta ON
Carton Contents switchbox start/stop lever lock off button cable clip x 2 grassbox handle washer x 4 wingknob x 4 Easimo only bolt x 2 upper handle grassbox upper grassbox lower grassbox tongue electric cable with moulded on plug safety flap lower handle x 2 motor cover instruction manual deck IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. The Loose Parts Pack is packaged underneath the deck of the product.
tions to use the machine. Stop using the machine while people, especially children, or pets are nearby. 4. Only use the lawnmower in the manner and for the functions described in these instructions. 5. Never operate the lawnmower when you are tired, ill or under the influence of alcohol, drugs or medicine. 6. The operator or user is responsible for accidents or hazards occurring to other people or their property. Electrical 1.
Assembly Instructions A 3 2 1 B 1 2 C 1 3 4 5 2 D E • The Loose Parts Pack is packaged underneath the deck. Assembly of Lower Handles to Deck 1. Place the bolt (A2) through the hole in the lower handle (A1) until the lower handle fits into the recess (A3) 2. Place the washer (B1) and the wing knob (B2) on to the bolt and tighten the wing knob. 3. Repeat on the other side. Assembly of Upper Handles to Lower Handles. 1.
Grassbox G 1 Fitting Fully Assembled Grassbox to Lawnmower. 3 1. 2. 3. 2 H 4. J • IMPORTANT ! AFTER FITTING ENSURE NO GAP REMAINS BETWEEN THE SAFETY FLAP AND THE GRASSBOX. • • Removal is the reverse procedure. For larger areas of grass where grass collection is not required you can use your lawnmower without the grassbox. Ensure the Safety Flap is fully closed. The design of the safety flap permits the cut grass to be discharged downward behind the machine.
Starting and Stopping M N P Q To Start your Lawnmower 1. Form loop in mains cable and push the loop through the slot. (M) 2. To secure, position loop over the hook and pull the cable back through the slot (N). 3. Connect plug to mains and switch on. 4. Tilt the handle downwards to slightly raise the front of the lawnmower and to reduce the risk of lawn damage whilst starting. The switchbox is provided with a lock-off button (P1) to prevent accidental starting. 5.
Caring for your Lawnmower V1 Cleaning • USE GLOVES • IMPORTANT:- It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the deck could become a potential fire hazard. 1. Remove grass from under the deck with brush. (V1) 2. Using a soft brush - remove grass clippings from all air intakes (V2), the discharge chute (V3) and the grass box (V4). 3. Visimo Only - Using a soft brush, remove grass clippings from the vision window (V5). 4.
Service Recommendations 1. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. 2. Always use genuine Spare Parts. 3. Prepacked spares are available from most Husqvarna UK Ltd. stockists. 4. Your product is uniquely identified by a silver and black product rating label 5.
EC Declaration of Conformity Husqvarna AB, 561 82, Huskvarna, Sweden Declare under our sole responsibility that the product(s); Category........................................ Electric Rotary Lawnmower Model(s)......................................... VM032, VM032+, RM032, EM032, EM032+,RE32 Identification of Series................... See Product Rating Label Year of Construction......................
