User manual

4
(GB) ASSEMBLY
Fitting the Tine
• Use the same procedure for
fitting the Multi-purpose Tine and
the Raking Tine Attachment.
1. Line up the tine collar as
illustrated in Fig. C.
2. Place the tine onto the shaft as
illustrated in Fig. D.
3. Turn the tine collar clockwise, as
illustrated in Fig. E, until it
locates into place.
• Removal is the reverse
procedure. Ensure the tine
collar is clean and free from dirt
before refitting.
Fitting the Steady Handle
1. Attach the steady handle to your
product using the bolt and
handle knob as shown in Fig. F.
Steady Handle Adjustment
1. To adjust the steady handle to a
new position, loosen handle as
shown in Fig G and move
handle to one of the three
positions as shown in Fig H.
2. Re-tighten handle knob.
Product Rating Label
Product Number . . . . . . . . . . . . . . . . .
Model Number . . . . . . . . . . . . . . . . . . .
Serial Number . . . . . . . . . . . . . . . . . . .
Date of Purchase. . . . . . . . . . . . . . . . .
Place of Purchase . . . . . . . . . . . . . . . .
•PLEASE KEEP PROOF OF PURCHASE•
Every Flymo product is uniquely identified by a
silver and black product rating label.
To ensure you have full product information
when obtaining spares or advice from one of
our approved service centres, or if you need
to contact Flymo/Partner's own customer
service department, you should make a note
in the space provided of the information
shown in fig.B. It will also be useful to make
a note of the date and place of purchase
before you return your guarantee card.
B
Assembly & Adjustment
D
E
C
F
G
H
√
x