User manual

CABLES
IMPORTANT
• Use only 1.00mm
2
size cable up to 40 metres
length maximum.
Maximum rating :
1.00mm
2
size cable, 10 amps 250 volts AC.
• THE MICRO LITE IS SUPPLIED WITH CABLE
WIRED DIRECTLY INTO THE PRODUCT.
1. Flymo Mains Cables and Extension Cables are
available from your local Electrolux Outdoor
Products Approved Service Centre.
2. Do not wire an extension cable directly to your
product yourself. Please contact your local
Electrolux Outdoor Products Approved Service
Centre for further information on the connectors
and kits available.
3. Only use extension cables specifically designed
for outdoor use.
CONNECTORS
IMPORTANT
• Flymo connectors are suitable for use with 2 core
cable only. Under no circumstances should these
connectors be used for earthed products.
• All Flymo connectors and cables are of splash-
proof construction. They are not waterproof and
must not be left outside permanently nor should
they be submerged or immersed in water. Do not
let cable lay or trail through pools of water or
splashed with water from hose pipes.
MAINS PLUG REPLACEMENT
IMPORTANT
• If the plug supplied is cut off it should be
d e s t r oyed. There is an electric shock hazard if a
cut off plug is inserted into a 13 amp socket.
1. No earth re q u i r ed. Flymo products are double insulat-
ed to EN60335 and under no circumstances should an
earth be connected to any part of the product.
2. Ensure the mains voltage suits your product
3. IMPORTANT!
The wires in the mains lead are coloured in
accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
The wire which is coloured BLUE must be con-
nected to the Terminal which is marked with the
letter 'N' or coloured BLACK.
The wire which is coloured BROWN must be
connected to the Terminal which is marked with
the letter 'L' or coloured RED.
4. It is important that the outer sheath is clamped
correctly into the 3-pin plug.
5 . If in doubt consult your local Service Repairer or
qualified electrician before the machine is used.
6. A 13 Amp fuse must be fitted to the Mains Plug.
7. The normal plug fuse and household fuse only
protect the electrical equipment and are not a
safeguard against electrocution.
A
Lower Handle to Hood Assembly (A)
• Ensure the motor cover is fitted correctly,
as illustrated
• Tilt motor cover into forward position
before assembly
1. Insert lower handles through the 2 holes in the
motor cover and push down.
2. Secure lower handles to hood by firmly push-
ing fixing pins through holes in motor cover,
handle and hood.
Fitting Upper Handles to Lower Handles (B)
1. Ensure the upper handle is located correctly
with the lock-off button on the switchbox upper-
most
2. Ensure the upper handle and the lower handle
are aligned correctly.
3. Insert the nut into the handle knob (B1).
4. Fit the bolts, washers and handle knobs (B2).
5. Fit the cable to the handles with the clips provid-
ed (B3). Make sure the cable is not trapped
between the handles.
Assembly Instructions
If your product is hard wired i.e. non-detach-
able mains electric cable, a conversion kit and
extension cable is available from all Electrolux
Outdoor Products Approved Service Centres
which can be found in your local Yellow Pages.
B
lock-off
button
1
2
3