Glide Master 340 Glide Master 360 Glide Master 380 Original Instructions TIO A M R N NFO I T TA N se R nce O I M P before u re refere tu Read in for fu ta & re For all customer enquiries or for replacement parts, contact:- 01325 300303 www.flymo.com customer.services@husqvarna.co.
1 Carton Contents Easi Reel cable winder electric cable with moulded plug start/stop levers switchbox cutting height spacers (1 fitted to lawnmower & 2 inside product under grassbox) instruction manual spanner/scraper tool (inside product under grassbox) IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd.
2 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it. 2. Before use, examine cable for damage, replace it if there are signs of damage or ageing. 3. Do not use the lawnmower if the electric cables are damaged or worn 4. Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected.
3 Assembly Instructions A B Preparing your lawnmower for use • Your lawnmower is supplied with the upper handle folded over the machine for packing and transportation. Handle in Operating Position 1. Lift handle as illustrated in figure A. • Do not drop the handle. • Make sure that the cable does not become trapped between the handles Attach the Easi-Reel cable winder as illustrated in figure B This is used to store the power cable after using the product - see ʻEasi-Reel Cable Winderʼ section.
Grassbox Instructions K grassbox is full grassbox is empty L Grassbox Full (K) 1. As the grassbox fills up, grass will be clearly visible through the window in the lid (K). 2. When the window is full it is time to empty the grassbox. Emptying the Grass • Stop the lawnmower, and wait until the blade has stopped rotating BEFORE lifting the grassbox lid. 1. Lift grassbox lid. (L) 2. Lift out grassbox and empty. (M) 3. Replace grassbox and close lid carefully.
Removing and fitting the Blade and Fan Removing the Blade and Fan 1. To remove the blade bolt, hold the fan firmly and with the spanner provided loosen the blade bolt by turning it anti-clockwise (Q). 2. Remove the blade bolt, blade, spacers and fan. (R) 3. Inspect for damage and clean as necessary. • Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one.
Cleaning the Easi-Reel cable winder 1. At the back of the cable winder, squeeze together the two catches (T1) and remove the cable spool. 2. Clean the cable spool and the area it was located with a soft brush (T2 & T3) 3. Replace the cable spool, ensuring it clicks into place. Transporting the lawnmower. • The lawnmower may be transported on its roller (V). At the End of the Mowing Season 1. Replace blade, bolts, nuts or screws, if necessary. 2. Clean your lawnmower thoroughly. 3.
Guarantee & Guarantee Policy If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna UK Ltd., through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing: (a) The fault is reported directly to the Authorised Repairer. (b) Proof of purchase is provided. (c) The fault is not caused by misuse, neglect or faulty adjustment by the user. (d) The failure has not occurred through fair wear and tear.
EC Declaration of Conformity Husqvarna UK Ltd., Aycliffe Industrial Park Newton Aycliffe, Co. Durham, DL5 6UP, England Declare under our sole responsibility that the product(s); Category............................Electric Lawnmower Type(s) ...........................GM340, GM360, GM380 Identification of Series.......See Product Rating Label Year of Construction..........See Product Rating Label Conforms to the essential requirements & provisions of the following EC Directives: 98/37/EC (until 31.12.
