® EASICUT 500CT Original Instructions AT ORM ION F T IN N A RT e e I M P O before us referenc re Read in for futu a & ret
Carton Contents Switch Levers Handguard instruction manual blade cover Battery Pack Charger Cradle Charger IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:Husqvarna UK Ltd.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool.
Power tool use and care 1. Know how to stop the product quickly in an emergency. 2. Never hold the product by the guard. 3. Never operate the product with damaged guards or without guards in place. 4. Do not use stepladders whilst operating the product. 5. Use the product only in daylight or good artificial light. 6. Avoid operating your product on a wet hedge, where feasible. 7. Keep hands and feet away from the cutting means at all times and especially when switching on the motor. 8.
Charging the Battery B Initial Charging Procedure 2 1 C 1. Use the charger indoors only. 2. Ensure the charger is not exposed to moisture. Keep the charger and the product dry at all times. 3. Connect the charger cable to the Charger Cradle (B1). and plug the Charger into a suitable household electrical wall socket and switch on (B2).. 4. Place the Battery Pack into the Charger Cradle.(C). 5. The red indicator lamp glows continuously during charging.(C1) 6.
How to Use How to Use your Hedgetrimmer 1. Inspect area to be cut before each use - remove objects which can be thrown or become entangled in the cutting blades. 2. Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position. 3. Allow the cutting blades to reach full speed before entering the material to be cut. 4. Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc. 5.
Fault Finding Hints Cutting blade stops under load 1. Cut at a slower pace. 2. Recharge Battery. 3. If cutting blade still stops under load? Immediately remove the Battery Pack and consult your local approved Service Centre. Fails to stop when one switch lever is released. Immediately remove the Battery Pack and consult your local approved Service Centre. Poor cut quality 1. Ensure the product is being used correctly (see How to Use) 2. Ensure blades are free from trapped debris 3.
Service Recommendations 1. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. 2. Always use genuine Husqvarna Spare Parts. 3. Prepacked spares are available from most Husqvarna UK Ltd. stockists. 4. Your product is uniquely identified by a silver and black product rating label 5.
