Installation Instructions
English - 51
6. MENU FUNCTIONS
The test has failed if the robotic lawnmower
cannot follow the guide wire all the way to the
connection point with the boundary wire. It is likely
that the installation has not been carried out
​​in accordance with the instructions in
3. Installation. Common errors are for instance
that there is not enough open space to the left of
the guide wire as seen facing the charging station
or that the guide wire is not laid at an angle on a
steep slope. See 3.6 Installation of the guide wire.
Rectify the installation and run a new test
with Calibrate guide.
Reset user settings
This function allows you to reset the robotic
lawnmower to the default settings it had when it left the
factory.
1. Select Reset user settings in the menu and press
OK. Enter the correct PIN code and press OK.