Installation Instructions

50 - English
6. MENU FUNCTIONS
Remote start
One important function with the guide wire is the
capacity to steer the robotic lawnmower to remote
garden areas when required. This function is very
useful in gardens where, for instance, the front and
back are joined by a narrow passage where the
charging station cannot be installed.
With this function activated, (any option other than
Never is selected) the robotic lawnmower will follow the
guide wire from the charging station to the point where
the guide wire connects to the boundary wire. It begins
to mow when it reaches this point. How often it must
follow the guide wire from the charging station is
selected as a proportion of the total number of times it
leaves the charging station. At all other times, the
robotic lawnmower leaves the charging station in the
standard manner and starts to mow.
The following five options can be selected;
• Never (0%)
• Rarely (approx. 20%)
• Medium (approx. 50%)
• Often (approx. 80%)
• Always (100%)
•
Select the percentage that corresponds to the size of
the remote area relative to the total working area. If the
remote area is for instance less than half of the total
working area, then Rarely must be selected. If the
remote area is for instance half of the total working
area, Medium must be selected. Compare with the
examples in 7. Garden examples on page 50.
The default setting is Rarely.
Calibrate guide
The Calibrate guide function allows you to test if the
robotic lawnmower can follow the guide wire out from
the charging station.
To test the guide wire:
1. Place the robotic lawnmower in the charging
station.
2. Select Calibrate guide and press OK. The
robotic lawnmower will now leave the charging
station, run a calibration process in front of the
charging station and then follow the guide wire to
the connection point with the boundary wire and
then start mowing.
3. Check that the robotic lawnmower can follow the
guide wire all the way to the connection point
with the boundary wire.