Installation Instructions
46 - English
6. MENU FUNCTIONS
• Work hours 1
to set start and stop times for work hours 1. Enter each
required time in hours and minutes and press OK to
confirm the entered time.
• Work hours 2:
to set start and stop times for work hours 2. Enter each
required time in hours and minutes and press OK to
confirm the entered time.
• Work days
to select the days the robotic lawnmower must work.
The robotic lawnmower will work during the days that
are ticked off.
• Reset timer
reset values to the factory settings.
To inactivate Work hours 1 or Work hours 2, enter the time
00:00 - 00:00 to reset the timer to --:-- - --:--.
A clock symbol is displayed on the start page when the timer
settings are set. The clock symbol is black when the robotic
lawnmower is not allowed to mow due to a timer setting and
it is white when the mower is allowed to mow.
The robotic lawnmower has an inbuilt standby period of
about 11 hours a day. The robotic lawnmower is parked in
the charging station during this period. See 4.2 Using the
timer on page 35.
6.4 Security
Through this selection, settings relating to security
and the connection between the mower and the
charging station can be made.
Change PIN code
Enter the new PIN code and press OK. Enter the same
code again and confirm by pressing OK. When the PIN
code is changed, a message stating that the PIN code
has been changed appears in the display momentarily.
Make a note of the new PIN code on the designated
line in Memo on page 4.
Security level
There are three security levels to choose from: low,
medium and high Low and medium security prohibits
access to the robotic lawnmower if the PIN code is
unknown. High security also includes a warning that
beeps if the correct PIN code is not entered after a
designated time period. To disable the robotic
lawnmower, press down the stop button and set the
main switch to 0.
Function Low Medium High
Time lock X X X
PIN request X X
Alarm X
Change PIN code
Security level
New loop signal
Timer
Installation
Security
Settings
Low
Medium
High
Change PIN code
Security level
New loop signal