Installation Instructions

English - 45
6. MENU FUNCTIONS
6.3 Timer
The lawn should not be cut too often to obtain the
best mowing result. Consequently, it is important to
limit the operating time using the timer function if the
working area is less than the robotic lawnmower's
working capacity. When the robotic lawnmower is
allowed to mow too much, the lawn may appear
flattened. Besides, the robotic lawnmower is
subjected to unnecessary wear.
The timer function is also an ideal means to control
which work hours the robotic lawnmower should not
mow, for example, when the children are playing in
the garden.
The factory setting for the timer is 07:00-22:00 and it
allows mowing every day of the week. This setting is
suitable for a working area of about 400 m
2
.
When setting the timer, calculate that the robotic
lawnmower mows about 30 m
2
per hour and day.
The table below provides suggestions for different
timer settings depending on garden size. The table can
be used to set the operating time. The times should be
seen as indicative, they may need to be adjusted to
suit the garden. Use the table as follows:
1.Find a work area that closest matches the garden's
area.
2.Select an appropriate amount of work days per week
(for some work areas 7 days may be needed).
3.Work hours per day shows how many hours a day
the robotic lawnmower will be allowed to work for the
selected amount of work days.
4.Suggested time interval shows a time interval that
corresponds to the required work hours per day.
Timer settings depending on garden size
Work area
Work days per week Work hours per day Suggested time time interval
100 m
2
5 4,5h 07:00 - 11:30
7 3,5h 07:00 - 10:30
200 m
2
5 9h 07:00 - 16:00
7 6,5h 07:00 - 13:30
300 m
2
6 11,5h 07:00 - 18:30
7 10h 07:00 - 17:00
400 m
2
7 13h 07:00 - 20:00
Work hours 1
Work hours 2:
Work days
Reset timer
Timer
Installation
Security
Settings