User's Manual

Beijing Flyingvoice technology Co.,
34
Field Name Description
Domain Name Type If or not use domain name in the SIP URI.
Carry Port Information If or not carry port information in the SIP URI.
Signal Port The local port of SIP protocol, default is 5060.
DTMF Type Choose the DTMF type from Inbound, RFC2833 and SIP INFO.
RFC2833 Payload(>=96) User can use the default setting.
Register Refresh Interval The interval between two normal Register messages. You can use
the default setting.
RTP Port
Set the port to send RTP.
The device will select one idle port for RTP if you set “0”;
otherwise use the value which user sets.
Cancel Message Enable When you set enable, an unregistered message will be sent before
registration, while you set disable, unregistered message will not be
sent before registration. You should set the option for different
Proxy.
Session Refresh Time(sec) Time interval between two sessions, you can use the default
settings.
Refresher Choose refresher from UAC and UAS.
Prack Enable If or not enable prack.