Beijing Flyingvoice technology Co., User Manual G201N4 Version 1.
Beijing Flyingvoice technology Co., Revision Record Version Date Author Firmware Version Applicability V1.0 2013-07-22 Chen Jianjun V1.0 The initial version(lack of the panel pictures). V1.1 2014-01-02 Maylin V3.05(201312311327) The second edition, update based on the new firmware. V1.2 2014-06-08 Sean Liu Add G201NW/G201N Specification. V1.
Beijing Flyingvoice technology Co., Declaration of Conformity Part 15 FCC Rules This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Beijing Flyingvoice technology Co., Table of Contents 1.Preamble ........................................................................................................................................ 1 1.1 Package Contents ................................................................................................................ 1 2.Indicators and Connectors .............................................................................................................. 1 2.1 LED Indicators ...........
Beijing Flyingvoice technology Co., 5.5 Phone................................................................................................................................. 36 5.5.1 Preferences ............................................................................................................. 37 5.5.2 Dial Plan................................................................................................................. 40 5.5.3Phonebook.........................................................
Beijing Flyingvoice technology Co., 1.Preamble Thank you for choosing G201N4 VOIP home gateway products. G201N4 home gateway is a highly integrated access device, and it is a kind of high-end multi-in-one gateway product which based on IEEE802.11n standard. This product is for individual users, SOHO (Small Office or Home Office) and small enterprises to provide high-performance access. It provides a wide range of management functions, can provide dhcp, dmz host, virtual servers, firewalls etc.
Beijing Flyingvoice technology Co., （2）The rear panel （3）The left side panel 2.2 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. Step 1.Connect Line port to land line jack with a RJ-11 cable. Step 2.Connect the WAN port to a modem or switch or router or Internet with an Ethernet cable. Step 3.Connect one port of 4 LAN ports to your computer with a RJ-45 cable.
Beijing Flyingvoice technology Co., you to connect 4 PCs directly. Step 4.Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity. Step 5.Check the Power and WAN, LAN LEDs to assure network connections. Warning: Please do not attempt to use other different power adapter or cut off power supply during configuration or updating the G201N4 VoIP home gateway. Using other power adapter may damage G201N4 and will void the manufacturer warranty.
Beijing Flyingvoice technology Co., 3. IVR(Interactive Voice Response) 3.1 The method of configuring a home gateway G201N4 can be configured three ways, as follows: (1)Use IVR (2)Use Web (3)Use Provision 3.2 Start IVR Customer can use the IVR function by referring to the following steps： (1) Connect analog phone to G201N4’s phone port, and connect the device well, off-hook and press the "****" key to start the IVR, then the user will hear a voice prompt device "Please enter your option, one WAN Port .....
Beijing Flyingvoice technology Co., Operation Code 1 2 3 4 Contents 1) Pick up the phone and press "****" key to start the IVR; 2) Select "1", then the device will broadcast the current WAN port connection type; 3) To change the WAN port network connection type, users hear "Please enter password" and enter the correct password, and end with "#" ; ◆ The IVR password is the same as the one of WEB login, the user simply press the corresponding key, and the matching table is the 3.4 Notice.
Beijing Flyingvoice technology Co., 5 6 7 8 9 0 3) Enter the new DNS address and ends with a "#"; ◆Please use "*" to replace ". ", for example, the user can enter 192 * 168 * 20*1 to set up the new DNS to be 192.168.20.1. ◆When enter the new DNS please ends with a "#" 4) If the user set up correctly, the device will broadcast "operation successful". Note: if users need to exit the setup, please press the "* *" button.
Beijing Flyingvoice technology Co., ◆ After configure some functions, please restart the phone to make the change to take effect. ◆ Each time you enter the IP address or subnet mask, please use the "*" to replace " .", and end with"# ", for example, if you want to set the IP address to be 192.168.1.11 , enter 192 * 168 * 1 * 11 # .
Beijing Flyingvoice technology Co., 4. G201N4 webpage settings 4.1 Login WEB page G201N4 has an embedded Web server that will respond to HTTP get/post requests. User can use a Web browser like Microsoft's IE to login and then configure G201N4. 4.1.1 URL format Login web page URL format: http://WAN port IP address, for example, if your home gateway's WAN port IP address is 192.168.20.
Beijing Flyingvoice technology Co., 4.2 WEB Page Number Name Description 1 Navigation bar Click navigation bar, many sub-navigation bar will appear in the place 2. 2 Sub-navigation bar Click sub-navigation bar to enter to configuration webpage 3 Configuration title The configuration title 4 Configuration bars The configuration bars 5 Device Information Display the firmware version, DSP version, Current Time, and login mode. Press Logout button to logout.
Beijing Flyingvoice technology Co., Press it to reboot G201N4 5 .Configure from web 5.1 Status On this page, users can view the G201N4 system information and system log information. It is the first page which user will see firstly after login to WEB. 5.1.1 System Information On this page, user can view the product information of G201N4, SIP account status, network status and system status.
Beijing Flyingvoice technology Co., 5.1.2 System Log In this configuration page, the user can view the system log, G201N4 system recordings contain important configuration information. On this page, users can click the corresponding button to refresh, remove and save the relevant system information.
Beijing Flyingvoice technology Co., 5.2 Network 5.2.1 WAN 1) Static: In static mode, user should fill in the values of IP Address, Subnet Mask, Default Gateway, Primary DNS and Second DNS.
Beijing Flyingvoice technology Co., Field Name Connect Name IP Protocol Version Internet Route/Bridge Mode Description Use keywords to indicate WAN port service model (the parameters are defined in Network--> multi-WAN page) Temporarily only one IPv4 option Choose Static IP. Set network working mode, options are route and bridge. NAT Enable This requires multi-WAN port Page settings, please refer to 5.2.
Beijing Flyingvoice technology Co., 2）DHCP Mode Field Name Description Connect Name Use keywords to indicate WAN1-WAN5 port service model(the parameters are defined in Network--> multi-WAN page) IP Protocol Version Internet Route/Bridge Mode Temporarily only one IPv4 option Choose DHCP Set network working mode, options are route and bridge. NAT Enable This requires multi-WAN port Page settings, please refer to 5.2.7 VLAN Mode This requires multi-WAN port Page settings, please refer to 5.2.
Beijing Flyingvoice technology Co., Port Bind Port bind is used for binding the service for different LAN ports and SSIDs. 3）PPPOE Mode Field Name Description Connect Name Use keywords to indicate the WAN1~WAN5 service mode (set relevant parameters in the WAN port settings page) IP Protocol Version INTERNET Currently, only one IPv4 option Choose PPPoE.
Beijing Flyingvoice technology Co., Manual: ♦ When the mode is Keep Alive, user need to set the 'keep alive redial period' values range from 0 to 3600s, the default setting is 5 minutes; ♦ When the mode is On Demand, user need to set the 'on demand idle time' value in the range of 0-60 minutes, the default setting is 5 minutes; ♦ When the mode is Manual, no need to do other settings.
Beijing Flyingvoice technology Co., 5.2.2 LAN Field Name Description IP Address Enter the IP address of the router on the local area network, all the IP addresses of the computers which are in the router’s LAN must be in the same network segment with this address, and the default gateway of the computers must be this IP address. (The default is 192.168.1.1) Local Subnet Mask Enter the subnet mask to determine the size of the network (default is 255.255.255.
Beijing Flyingvoice technology Co., DNS Mode Select DNS mode, options are Auto and Manual: ♦ When DNS mode is Auto, the device under LAN port will automatically obtains the preferred DNS and alternate DNS. ♦ When DNS mode is Manual, the user should manually configure the preferred DNS and alternate DNS Primary DNS Enter the preferred DNS address. Secondary DNS Enter the secondary DNS address.
Beijing Flyingvoice technology Co., 5.2.4 MAC Clone MAC address is the hardware address of the network device. Sometimes the network provider may set the network device's MAC bound to the network accounts. So when the user uses a new home gateway may not pass vendor certifications. In this case, the user can use the MAC clone function to clone your computer's physical address to the device’s Internet port.
Beijing Flyingvoice technology Co., Field Name DMZ Enable DMZ Host IP Address Decryption If or not enable DMZ Used to enter the DMZ host IP address 5.2.6 DDNS Field Name Dynamic DNS Provider Description DDNS is enabled and select a DDNS service provider Account Enter the DDNS service account Password Enter the DDNS service account password DDNS Enter the DDNS domain name or IP address Status See if DDNS is successfully upgraded 5.2.
Beijing Flyingvoice technology Co., Field Name Most Nat connections Description The largest value which the G201N4 can provide Mss Mode Choose Mss Mode from Manual and Auto Mss Value Set the value of TCP AntiDos-p You can choose to enable or prohibit IP conflict detection Select enable if enabled, phone IP conflict will have tips or prohibit； IP conflict Detecting Detect IP address conflicts of the time interval Interval 5.2.
Beijing Flyingvoice technology Co., Field Name VLAN ID Route/Bridge Mode Service Take VLAN tag Description Configure VLAN ID Select Route mode or Bridge mode. There are these options VOICE, TR069, INTERNET, TR069-INTERNET, TR069-VOICE, and VOICE-INTERNET, and TR069-INTERNET-VOICE, and Other Whether or not carry VLAN tag 5.3 Wireless 5.3.1 Basic Field Name Radio on/off Wireless connection mode Description Click the button to enable or disable wireless.
Beijing Flyingvoice technology Co., SSID Multiple SSID1~SSID3 It is the basic identity of wireless LAN. SSID can be any alphanumeric or a combination of special characters. It will appear in the wireless network access list. G201N4 supports multiple SSIDs.
Beijing Flyingvoice technology Co., 5.3.2 Wireless Security Setting SSID choice Security Mode Select a SSID from SSID, multi SSID1, multi SSID2. multi-SSID3. Select an appropriate encryption mode to increase the security and privacy features of wireless dhome gateway. Select a different encryption mode, the web interface will be different, user can configure the corresponding parameters under the mode you select.
Beijing Flyingvoice technology Co., Security Mode This is used to select one of the 4 WEP keys, key settings on the clients should be the same with this when connecting. WEP Keys Set the WEP key. A-64 key need 10 Hex characters or 5 ASCII characters; choose A-128 key need 26 Hex characters or 13 ASCII characters.
Beijing Flyingvoice technology Co.
Beijing Flyingvoice technology Co., prohibit Example: Prohibit the device whose wireless network card MAC address is 00:1F: D0: 62: BA: FF’s to access the wireless network, and allow other computers to access the network. Implementation: As shown, the Policy is Reject, add 00:1F: D0: 62: BA: FF to the MAC, click Save and reboot the device settings to take effect. 5.3.3 Wi-Fi MultiMedia WMM (Wi-Fi MultiMedia) is the QoS certificate of Wi-Fi Alliance (WFA).
Beijing Flyingvoice technology Co., Field Name WPS Setting WPS Summary Description If or not enable WPS function Display the current status of WPS, including current state, SSSID name, authentication methods, encryption type and the PIN code of this AP. Generate Reset OOB Generate a new PIN code G201N4 uses default security policy to allow other non-WPS users to access and apply. WPS Mode PIN：Enter the PIN code of the wireless device which accesses to this LAN in the following option, and press apply.
Beijing Flyingvoice technology Co., two methods, only when the clients choose PCB access, the clients can connect the AP automatically. WPS shows status in three ways: WSC: Idle WPS Status WSC: Start WSC Process(begin to send messages) WSC: Success; this means clients have accessed the AP successfully, WPS connects well. 5.3.5 Wireless Client This page shows user the clients’ information which connects to the AP. 5.3.
Beijing Flyingvoice technology Co., Field Name BG Protection Mode Beacon Interval Dhome gateway Beacon Rate(DTIM) Fragment Threshold Description Select G protection mode, options are on, off and automatic. The interval of sending a wireless beacon frame, within this range, it will send a beacon frame for the information of the surrounding radio network.
Beijing Flyingvoice technology Co., 5.4 SIP Account 5.4.1 Line 1 In this webpage, user can configure the information on Line 1, including the following 4 parts: Basic, Audio Configuration, Supplementary Service Subscription and Advanced. 1) Basic Set the basic information provided by your VOIP Service Provider, such as Phone Number, Account, password, SIP Proxy and so on. Field Name Line Enable Description If or not enable the line. If or not enable PEER to PEER.
Beijing Flyingvoice technology Co., 2) Display Name The number will be displayed on LCD Phone Number Enter telephone number provided by SIP Proxy Account Enter SIP account provided by SIP Proxy Password Enter SIP password provided by SIP Proxy Audio Configuration Field Name Description Audio Codec Type1 Choose the audio codec type from G.711U, G.711A, G.722, G.729, G.723 Audio Codec Type2 Choose the audio codec type from G.711U, G.711A, G.722, G.729, G.
Beijing Flyingvoice technology Co., Field Name Call Waiting Hot Line Description If or not enable Call Waiting Fill in the hotline number. Pickup handset or press handsfree/headset button, the device will dial out the hotline number automatically. MWI Enable If or not enable MWI (message waiting indicate). If the user needs to user voice mail, please enable this feature.
Beijing Flyingvoice technology Co., Field Name Domain Name Type Description If or not use domain name in the SIP URI. Carry Port Information If or not carry port information in the SIP URI. Signal Port The local port of SIP protocol, default is 5060. DTMF Type Choose the DTMF type from Inbound, RFC2833 and SIP INFO. RFC2833 Payload(>=96) User can use the default setting. Register Refresh Interval The interval between two normal Register messages. You can use the default setting.
Beijing Flyingvoice technology Co., SIP OPTIONS Enable When you set enable, the device will send SIP-OPTION to the server, instead of sending periodic Hello message. The sending interval is Keep-alive interval. Primary SER Detect Interval Max Detect Fail Count Test interval of the primary server, the default value is 0, it represents disable. Interval of detection of the primary server fail; the default value is 3, it means that if detect 3 times fail; the device will no longer detect the primary server.
Beijing Flyingvoice technology Co., 2) NAT Traversal Field Name NAT Traversal Description 1．If or not enable NAT Traversal 2. G201N4 supports STUN Traversal; If you want to traverse NAT/Firewall, select the STUN. STUN Server Address Add the correct STUN service provider IP address. NAT Refresh Interval Set NAT Refresh Interval, default is 60s. STUN Server Port Set STUN Server Port, default is 5060. 5.4.
Beijing Flyingvoice technology Co., 5.5.1 Preferences 1) Volume Settings Field Name Handset Input Gain Handset Volume Description Adjust the handset input gain from 0 to 7. Adjust the output gain from 0 to 7. 2) Regional Field Name Description Tone Type Choose tone type form China, US, Hong Kong and so on.
Beijing Flyingvoice technology Co., Min Jitter Delay The Min value of home gateway’s jitter delay, home gateway is an adaptive jitter mechanism. Max Jitter Delay The Max value of home gateway’s jitter delay, home gateway is an adaptive jitter mechanism. Ringing Time Regional Ring Waveform How long G201N4 will ring when there is an incoming call. Select regional ring waveform, options are Sinusoid and Trapezoid, the default Sinusoid.
Beijing Flyingvoice technology Co., when line is busy. Feature Code No Answer Forward The phone number which the call will be forwarded to when there's no answer. No Answer Timeout The seconds to delay forwarding calls, if there is no answer at your phone. Hold key code Call hold signatures, default is *77. Conference key code Signature of the tripartite session, default is *88. Transfer key code Call forwarding signatures ,default is *98.
Beijing Flyingvoice technology Co., ICMP Ping If or not enable ICMP Ping. If enable this option, home gateway will ping the SIP Server every interval time, otherwise, It will send “hello” empty packet to the SIP Server. Escaped char enable Open special character translation function; if enable, when you press the # key, it will be translated to 23%, when disable, it is just # 5.5.2 Dial Plan 1) Parameters and Settings Field Name Dial Plan Line Digit Map Action Description If or not enable dial plan.
Beijing Flyingvoice technology Co., Deny means G201N4 will reject the matched number, while Dial Out means G201N4 will dial out the matched number. Press it to move up. Move Up Press it to move down. Move Down 2) Adding one dial plan: Step 1. Enable Dial Plan Step 2. Click Add button, and the configuration table Step 3. Fill in the value of parameters. Step 4.Press OK button to end configuration. Step 5. Press Save button to save changes 3) Dial Plan Syntactic No.
Beijing Flyingvoice technology Co., 5.5.3Phonebook In this page, user can upload or download phonebook or blacklist file, and can add or delete or edit phonebook and blacklist one by one. 1)Upload&&Download phonebook Click Click to select the phonebook file and click to upload it to G201N4; to save the phonebook file to your local computer. 2)Upload&&Download Blacklist Click to select the blacklist file and click to save the blacklist file to your local computer.
Beijing Flyingvoice technology Co., Select one contact, click Edit to edit it, click Delete to delete, and click Move to blacklist to move the contact to blacklist. Click Add, user can add one new contact, as the upon picture, enter the contact name and phone number, and select one ring tone, there are ten kinds of different ring tones to choose, click OK to confirm and click Cancel to cancel.
Beijing Flyingvoice technology Co.
Beijing Flyingvoice technology Co., 5.6 Diagnosis In this page, user can do ping test and traceroute test to diagnose the device’s connection status. 1) Ping Test Enter the destination IP or host name, and then click Apply, device will perform ping test. 2) Traceroute Test Enter the destination IP or host name, and then click Apply, device will perform traceroute test. 5.
Beijing Flyingvoice technology Co., 5.7.1 Management You can configure the value of Time/Date, password, web access, and system log and so on.
Beijing Flyingvoice technology Co., New Password Confirm Password Language Input the new password Input the new password again Select the language for the web, the device support Chinese, English, and Spanish and so on. Remote Web Login Web Port If or not enable remote Web login Set the port value which is used to login from Internet port and PC port, default is 80. Web Idle timeout Set the Web Idle timeout time. The webpage can be logged out after Web Idle Timeout without any operation.
Beijing Flyingvoice technology Co., Set the summer time steps: Step 1. Enable Daylight Saving Time. Step 2. Set value of offset, like the upon picture Step 3: Set staring Month/Week/Day/Hour in Start Month/Start Day of Week Last in Month/Start Day of Week/Start Hour of Day, analogously set stopping Month/Week/Day/Hour in Stop Month/Stop Day of Week Last in Month/Stop Day of Week/Stop Hour of Day. Step 4.Press Saving button to save and press Reboot button to active changes.
Beijing Flyingvoice technology Co., Users can use the packet trace feature intercepts the packets that were sent. Click the Start button, start dhome gateway tracking and keep refreshing the page until the message trace shows to stop, click the Save button to save captured packets. 7) Factory settings Click Factory Default to restore the residential gateway to factory settings. 5.7.2 Firmware Upgrade Press to select the firmware file and press to upgrade the firmware. 5.7.
Beijing Flyingvoice technology Co., Field Name Description Provision Enable If or not enable provision. Resync on Reset If or not enable resync after DIV378 restart Resync Random Delay(sec) Set the maximum delay for request the synchronization file, default is 40. Resync Periodic(sec) If the last resync was failure, G201N4 will retry resync after the “Resync Error Retry Delay ” time, default is 3600s.
Beijing Flyingvoice technology Co., Field Name Upgrade Enable Upgrade Error Retry Delay(sec) Upgrade Rule Description If or not enable firmware upgrade via provision. If the last upgrade fails, G201N4 will try upgrading again after “Upgrade Error Retry Delay” period, default is 3600s. URL of upgrade file 5.7.4 SNMP Field Name SNMP Enable Trap Server Address Description If or not enable SNMP. Enter the trap server address.
Beijing Flyingvoice technology Co., 5.7.5 TR069 Field Name Description TR069 Enable If or not enable TR069 CWMP If or not enable CWMP ACS URL ACS URL address User Name ACS username Password ACS password Periodic Inform Enable If or not enable the function of periodic inform, default is enable Periodic Inform Interval Periodic notification interval, the unit is seconds, default is 43200s User Name The username used to connect the TR069 server to the DUT.
Beijing Flyingvoice technology Co., 6 Functions 6.1 Making Calls ◆Dial the number directly and wait for 5 seconds (default No Key Entry Timeout). ◆Dial the number with ending char #, G201N4 will dial out immediately ◆Dial the phone number which matches one dial rule, G201N4 will dial out immediately, no need to press # or wait for 5 seconds. 6.2 Call Waiting Step 1.Enable waiting feature in SIP-->Line1-->supplementary Service→Call WaiFng (default is Enable) Step 2.
Beijing Flyingvoice technology Co., 6.4.2 Attended Transfer Assuming that call party A and B are in conversation. A wants to Attend Transfer B to C: Step 1.Party A dials *77 to hold B, A will hear dialing tone Step 2.Dial party C’s number, and press # (or wait for 5 seconds) to call C, then A will hear ringing tone. Step 3.If C answer the call, A will talk with C firstly Step 4.If C wants to talk with B, A press “*98” to transfer, and then C will talk with B.
Beijing Flyingvoice technology Co., 192*168*20*34# 6.8 Speed dialing Notice: The current firmware does not support speed dial, will be added in new branch firmware. Step 1.Set phone number(E.g.3333) in SIP Account→Line 1→Speed Dial, and then save the changes Step 2.Dial*74 to active speed dial function Step 3.Then dial 2 to call 3333, and G201N4 will dial out immediately. 6.9 Hotline Step 1.Set hotline in SIP Account→Line 1→Supplementary Service SubscripFon, you can refer to the following picture.
Beijing Flyingvoice technology Co., Step 4.Set starting Month/Week/Day/Hour in Start Month/Start Day of Week Last in Month/Start Day of Week/Start Hour of Day, analogously set stopping Month/Week/Day/Hour in Stop Month/Stop Day of Week Last in Month/Stop Day of Week/Stop Hour of Day. Step 5.Press Saving button to save and press reboot button to active changes. 6.11 Upgrade Firmware Function is to upgrade firmware in local. Step 1.Open Administration/Firmware Upgrade webpage Step 2.
Beijing Flyingvoice technology Co., Web Login Port is to set login port. 6.14 System log User can view system log in local or in remote. In local: Step 1.Open Administration/Management page, System Log Setting column. Step 2.Choose log level from INFO and Debug, in INFO level, G201N4 records INFO log, and in Debug level, G201N4 records all debug information. Step 3.Press Save button to save and then press Reboot button to make changes effective. In remote: Step 1.
