User's Manual

Chapter 3 Web Interface
63
Table 70 Provision
Field Name
Description
Provision Enable
Enable provision or not.
Resync on Reset
Enable resync after restart or not
Resync Random
Delay(sec)
Set the maximum delay for the request of synchronization file. The default is 40
Resync Periodic(sec)
If the last resync was failure, The router will retry resync after the “Resync Error
Retry Delay ” time, default is 3600s
Resync Error Retry
Delay(rec)
Set the periodic time for resync, default is 3600s
Forced Resync
Delay(sec)
If it’s time to resync, but the device is busy now, in this case,the router will wait
for a period time, the longest is “Forced Resync Delay”, default is 14400s,
when the time over, the router will forced to resync
Resync After
Upgrade
Enable firmware upgrade after resync or not. The default is Enabled
Resync From SIP
Enable/Disable resync from SIP
Option 66
It is used for In-house provision mode only. When use TFTP with option 66 to
realize provisioning, user must input right configuration file name in the
webpage. When disable Option 66, this parameter has no effect