User's Manual
Chapter 3 Web Interface
59
Language
Select the language for the web, the device support Chinese, English, and Spanish
and so on
Remote Web Login
Enable/Disable remote Web login
Web Port
Set the port value which is used to login from Internet port and PC port, default is 80
Web Idle timeout
Set the Web Idle timeout time. The webpage can be logged out after Web Idle
Timeout without any operation
Allowed Remote
IP(IP1,IP2,...)
Set the IP from which a user can login the device remotely
Telnet Port
Set the port value which is used to telnet to the device
NTP settings
Table 64 NTP settings
Field Name
Description
NTP Enable
Enable/Disable NTP
Option 42
Enable/Disable DHCP option 42. This option specifies a list of the NTP servers
available to the client by IP address
Current Time
Display current time
NTP Settings
Setting the Time Zone
Primary NTP Server
Primary NTP server's IP address or domain name
Secondary NTP Server
Options for NTP server's IP address or domain name
NTP synchronization
NTP synchronization cycle, cycle time can be 1 to 1440 minutes in any one, the
default setting is 60 minutes