User's Manual
Chapter 3 Web Interface
38
Enabled: Multiple copies of signals are transmitted to increase the chance of
successful delivery
Disabled: STBC is not employed for signal transmission
Aggregation MSDU (A-
MSDU)
Enabled: Allows the device to aggregate multiple Ethernet frames into a single
802.11n, thereby improving the ratio of frame data to frame overhead
Disabled: No frame aggregation is employed at the router
Auto Block Ack
Enabled: Multiple frames are acknowledged together using a single Block
Acknowledgement frame.
Disabled: Auto block acknowledgement is not used by the device – use this
configuration when low throughput/connectivity issues are experienced by
mobile devices
Decline BA Request
Enabled: Disallow block acknowledgement requests from devices Disabled:
Allow block acknowledgement requests from devices
HT Disallow TKIP
Enabled: Disallow the use of Temporal Key Integrity Protocol for connected
devices
Disabled: Allow the use of Temporal Key Integrity Protocol for connected
devices
HT LDPC
Enabled: Enable Low-Density Parity Check mechanism for increasing chance of
successful delivery in challenging wireless environments
Disabled: Disable Low-Density Parity Check mechanism