User's Manual

Chapter 3 Web Interface
28
Confirm Password
Enter your PPPoE password again
Service Name
Enter a service name for PPPoE authentication.
If it is left emply, the service name is auto detected.
Operation Mode
Select the mode of operation, options are Keep Alive, On Demand and Manual:
When the mode is Keep Alive, the user sets the 'keep alive redial period' values
range from 0 to 3600s, the default setting is 5 minutes;
When the mode is On Demand, the user sets the 'on demand idle time' value in the
range of 0-60 minutes, the default setting is 5 minutes;
When the mode is Manual, there are no additional settings to configure
Keep Alive Redial
Period
Set the interval to send Keep Alive messaging
PPPoE Account
Assign a valid user name provided by the ISP
Bridge Mode
Bridge Mode under Multi WAN is different with traditional bridge setting. Bridge mode employs no IP addressing
and the device operates as a bridge between the WAN port and the LAN port. Route Connection has to be built to
give IP address to local service on device.
Table 17 Bridge Mode