User's Manual

Chapter 2 Basic Settings
19
Setting up Wireless Connections
To set up the wireless connection, please perform the following steps.
1.Enable Wireless and Setting SSID
2.Open Wireless > Basic webpage as shown below:
Table 8 Wireless > Basic web page (user view)
Field Name
Description
Radio On/Off
Select “Radio Off”to disable wireless operation
Select “Radio on” to enable wireless operation
Please note: “Save” required for this parameter change
Network Mode
Choose one network mode from the drop down list.
SSID
The logical name of the wireless connection (text, numbers or various special
characters)
Multiple SSID 1-4
Multiple SSID 1 - 4, configure up to 4 unique SSIDs
broadcast(SSID)
Enabled: The device SSID is broadcast at regular intervals Disabled: The device
SSID is not broadcast at regulatr intervals,
disallowing wi-fi clients from automatically connecting to the FWR8401
AP Isolation
Enabled: Devices connected to the router are isolated from one another on virtual
networks
Disabled: Devices connected to the router are visible on the network to each other