User's Manual
Chapter 2 Basic Settings
18
Field Name
Description
Connect Name
Use keywords to indicate WAN port service model (the parameters are defined
in Network--> multi-WAN page)
Service
Chose the service mode for the created connection
IP Protocol Version
IPv4 and IPv6 are supported
WAN IP Mode
Choose Internet connection mode, DHCP, PPPoE, or Bridge
NAT Enable
Enable or disable NAT
VLAN ID
Multiple WAN connections may be created with the same VLAN ID
DNS Mode
Select DNS mode, options are Auto and Manual:
When DNS mode is Auto, the device under LAN port will automatically obtains
the preferred DNS and alternate DNS.
When DNS mode is Manual, the user should manually configure the preferred
DNS and alternate DNS
Primary DNS
Enter the preferred DNS address
Secondary DNS
Enter the secondary DNS address
DHCP
(Displayed when WAN IP Mode is set to DHCP)
DHCP Renew
Refresh the DHCP IP
DHCP Vendor
(Option60)
Specify the DHCP Vendor field Display the vendor and product name