User's Manual

Chapter 1 Product description
10
Hardware Installation
Before configuring your router, please see the procedure below for instructions on connecting the device
in your network.
Procedure 1 Configuring the Router
1. Connect the WAN port to the Interne your network’s modem/switch/router/ADSL
2. equipment using an Ethernet cable.
3. Connect one end of the power cord to the power port of the device. Connect the other end to the
wall outlet.
4. Check the Power, WAN, and LAN LED to confirm network connectivity.
Warning
Please do not attempt to use unsupported power adapters and do not remove power during
configuration or updating the device. Using other power adapters may damage the
equipment and will void the manufacturer warranty.
The standard power supply is 12V, 1A,and the Operation Temperature: 0~50 Degree C